3009
Replacement of the flowmeter unit by a Flow Gauge with Gauge Saver and a rugged all metal construction ensures less frequent & reduced maintenance / servicing. Tamper-proof Safety Blow off situated inside the regulator prevents unauthorized adjustment of blow off pressure. Larger Control Knob provides more convenient operation.

3008
The Regulator has a factory preset fixed static outlet pressure of approx. 4.2 Kg/Sq.cm (60 lbs/sqin) and is fitted with safety valve. Once the flowrate has been set, the regulator will automatically maintain a constant flow rate irrespective of changing volume of cylinder contents. If the oxygen line distal to the regulator should be blocked, the regulator automatically prevents the build up of an excessive pressure in the apparatus and tubing between the outlet of the regulator and the obstruction. A pressure gauge indicates the cylinder contents.

3041 - Metal

The Back Pressure Compensated (BPC) flowmeter incorporates a rotary pin valve control to permit adjustment of the flow rate to any desired level between 0 - 15 ltrs/min. Jacketed type shatterproof
tubes are fitted on the units The outlet at the bottom of the unit is fitted with a removable nipple. After removing the outlet nipple, a humidifier can be screwed into the outlet of the flowmeter unit. Flow
accuracy is unaffected by back pressure due to down stream restrictions caused by humidifiers, nebulizers etc.

3006
Set comprises of F/A Valve with Gauge (3005), Flowmeter (3007) & Gauge Saver (3115) The unit reduces the cylinder pressure by merely providing a variable restriction to the flow of Oxygen from the cylinder outlet. As volume of Oxygen in the cylinder reduces, the flowmeter has to be constantly adjusted to maintain the required flowrate. The flowmeter unit without control is fitted with jacketed type shatter proof tubes calibrated from 0-15ltrs/min.

Consists of an unbreakable jar with screw on cap fitted on top inlet and side outlet tubes. The inlet tube ends in a specially designed diffuser from which oxygen is bubbled through water before reaching the outlet.
3013 - Humidifier with “S” Hook - for hanging on the cylinder trolley or flowmeter unit.

3050 - Humidifier - screw on type - Metal Inlet

3012 - Humidifier - screw on type - Plastic Inlet Provided with 1/2” BSF threads that can be screwed on directly to the outlet of the flowmeter.

3051 - Humidifier - for generator - Metal Inlet

3040 - Humidifier - for generator - Plastic Inlet For use with an Oxygen Generator / Amar Oxygen Regulator. Has a 9/16 UNF female knurled nut & nipple at the inlet.

3014 - Adult
3015 - Child
3016 - Neonatal
Not just another oxygen nasal cannula - the ‘U’ shaped moulding with limbs which is inserted into the nostrils will not hurt the patient when inserted. Extremely light in weight, the nasal tips ensure a
comfortable fit for efficient oxygen therapy. Supplied with 2 meters tubing.

3017 - Adult
3018 - Child
Light weight design, soft feathered edges for increased patient comfort, nose clip for nose bridge adjustment & for better fit, pull through adjustable elastic head band & swivel tubing connector for
changing angle of operation without disturbing the mask.

3020 - Adult
3021 - Child
One piece adjustable venturi valve with a choice of seven oxygen percentage settings (24, 26, 28, 31, 35, 40 & 45%) allowing the concentration of oxygen delivered to the patient to be set and changed as clinically as is required. Eliminates use of several selector venturi valves thus significantly reducing the time required to change oxygen concentrations.

3037 - Adult
3038 - Child
High concentration Oxygen Mask is used to deliver 100% Oxygen to patient. There is a two litre reservoir bag with 3 one-way valves to deliver 100% Oxygen. Two expiratory valves are easily detachable as per the need of the patients.

3031 - Adult
3032 - Child
Set comprises of plain Oxygen Mask, Nebuliser Jar & tubing. The nebuliser jar is specially designed for the delivery of drugs for tracheobronchial deposition. At gas flow of 8 L/min, 70% of output will be particles of less then 5 microns.

3039
Mouthpiece is particularly useful for patients who can coordinate their breathing for drug delivery, thereby increasing the amount of aerosol reaching the lungs.

3026
A ventilating system for rigid wall bronchoscopy and laryngeal microsurgery. Comprises : 2mtrs. High Pressure Tubing, Thumb Valve Control and three Luer Lock Needles.

3027
Specially introduced for use with the Jet Ventilator and other applications, it has an extra gauge to indicate the outlet pressure of the regulator and incorporates a safety valve. The outlet pressure can be adjusted with the help of the key to desired value depending upon use for Paediatric or Adult patients.

3023
Combination Key & Spanner - For fitting Regulators & F/A Valves onto Cylinders and for opening Bull Nose type Cylinders. Cannot be used to open Pin Index type Cylinders.

3028
Multipurpose - For fitting flowmeters onto F/A Valves or Regulators, Hex Nuts onto Bull Nose type& Flush type Cylinders & for opening and closing both Bull Nose type as well as Pin Index type Cylinders.

3024
Key for Pin Index Cylinders - For opening Pin Index type Cylinders & fitting Hex Nuts to the valves.

3011
For using two BPC flowmeters from one oxygen regulator.