A housing for Rotameter tubes. The flow control is obtained by needle valves which can be easily distinguished from one another by touch & colour. Easy to read large size scales with fluorescent illumination, allow inside bobbins to be accurately read.

3700 - Accomodates one 230mm tube

3652 - Oxygen

Colour coded plastic cover, other components from stainless steel to avoid rusting, pin indexed for use on anaesthesia trolley.

3650 - Oxygen
3651 - Nitrous Oxide

One piece, brass chromed, robust & pin indexed for use on anaesthesia trolley.

3654 - Oxygen for use with F. A. Valve
3655 - Nitrous Oxide
3656 - Oxygen for use with Rao’s Regulator

For use other than anaesthesia trolley. Pin indexed, brass chromed, specially developed for flush type portable cylinders for use with portable anaesthesia apparatus. Ideal for domiciliary use, ambulances, mines, airports, railways and medical disaster situations.

3604

Normally positioned at the top of the apparatus table. It has a built in emergency oxygen push button and change over facility from open to closed circuit and vice versa.

3606

Incorporates a non-return valves assembly along with a button for flushing the circuit with oxygen in emergencies.

3603

Blows off when pressure exeeds 200cms of water column thus minimising the risk of back flow of gases.

3607

A battery operated pnuematically controlled device which activates an audio alarm for about fifteen seconds when oxygen pressure in the system falls to approximately 4.2kg/cm²

4002

Drawover type, designed to limit the maximum concentration of Halothane vapour to 3% by volume irrespective of the total gas flow through the unit. Adjustment is made by means of a ratchet type control valve. The glass jar is screwed on to the body and can be quickly detached for easy filling. The vaporizer is also suitable for use with Trichloroethylene in low concentrations.

3625 - Oxygen
3626 - Nitrous Oxide

For use with anaesthesia apparatus only. Outlets have nonreturn valves to avoid back flow of gases. Safety valve is incorporated in the unit. Hence no necessity of safety valve in the tubing between the regulator and the rotameter unit.

3629

To activate Nitrous Oxide Regulators only when Oxygen Regulators are pressurised, thereby minimising the risk of administering Nitrous Oxide in the absence of Oxygen. Safety valve incorporated in the unit. Hence no necessity of safety valve in the tubing between the regulator & the rotameter unit.

3675 - Oxygen
3676 - Nitrous Oxide

For connecting bulk cylinder to the anaesthesia apparatus. The unit comprises of a Regulator, 2 mtrs. High Pressure Tubing with ferrules and a Pin Index Adaptor to fit on the yoke of the apparatus in place of the service cylinder.

9023 - 22F x 22M & 22F at Bag end - Plastic
9025 - 23M x 23F & 22 F at Bag end - Plastic

The above will not bend or dent when accidentally dropped.

9200 - 22M/15F at patient end & 22F at distal end
9201 - 23M/15F at patient end & 23F at distal end

15mm E/T straight connectors can be fitted at the patient end, thus avoid using catheter mount & reducing dead space. Will not bend or dent when accidentally dropped.

9028

The patient end accepts anaesthesia mask & 15mm tracheal connector.

9050

Patient end accepts anaesthesia mask & 15mm tracheal connector. Low weight - 50gms - leads to minimization of the pressure strain for patient. Sturdy to withstand rough usage, will not bend or dent when accidentally dropped, needs no servicing with absence of circlips & rubber washers.